Plot Report
-----------

Report Written:     Tuesday, July 16, 2019
Project Path:       E:\Electronics\Can Bus\Hyd Drive Board 02\Hyd Drive Board 02.prj
Design Path:        E:\Electronics\Can Bus\Hyd Drive Board 02\Hyd Drive Board 02.pcb
Design Title:       
Created:            2016/04/12 11:36:56 AM
Last Saved:         2019/07/16 10:03:19 PM
Editing Time:       10323 min
Units:              mm (precision 2)


Device Settings
===============


Gerber Settings
===============

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.5 format absolute mm.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.


Drill Settings
==============

    Excellon Format 1    Format 3.5 absolute in mm.
    Zero suppression None



Plots Output
============

    Plot Job: "E:\Electronics\Can Bus\Hyd Drive Board 02\Hyd Drive Board 02.mop"


Gerber Output
=============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Documentation.gbr

    Layers:
    ------------------
    Documentation
    Board Outlines

    D-Code Shape  (mm)
    ---------------------
    D10    Round 0.050
    D11    Round 0.200
    D12    Round 0.076
    D13    Round 0.102
    D14    Round 0.120
    D15    Round 0.100
    D16    Round 0.150
    D17    Round 0.025
    D85    Round 0.127

Gerber Output
=============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Top Silkscreen.gbr

    Layers:
    ------------------
    Top Silkscreen
    Board Outlines

    D-Code Shape  (mm)
    ---------------------
    D11    Round 0.200
    D12    Round 0.076
    D16    Round 0.150
    D18    Round 0.152
    D19    Round 0.180
    D70    Round 0.254
    D71    Round 0.508
    D20    Round 0.250
    D85    Round 0.127

Gerber Output
=============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Top Paste Mask.gbr

    Layers:
    ------------------
    Top Paste Mask
    Board Outlines

    D-Code Shape  (mm)
    -------------------------------------------------
    D21    Rectangle 0.356 X 1.092  Rotation 90
    D22    Rectangle 2.362 X 3.048
    D23    Rectangle 2.448 X 3.348  Rotation 90
    D24    Rectangle 0.711 X 0.813
    D25    Rectangle 1.848 X 4.848
    D26    Rectangle 0.711 X 0.813  Rotation 90
    D27    Rectangle 1.148 X 1.448
    D28    Rectangle 1.848 X 4.848  Rotation 90
    D29    Rectangle 2.548 X 7.848
    D72    Rectangle 1.248 X 2.848  Rotation 90
    D73    Rectangle 0.298 X 1.648  Rotation 90
    D74    Rectangle 1.948 X 5.448
    D75    Bullet 2.848 X 1.348  Rotation 270
    D76    Round 2.848
    D77    Bullet 2.848 X 1.348  Rotation 90
    D78    Rectangle 0.610 X 1.098
    D79    Rectangle 1.198 X 1.748  Rotation 90
    D80    Rectangle 1.148 X 1.648  Rotation 90
    D81    Rectangle 1.148 X 1.448  Rotation 90
    D82    Rectangle 0.406 X 1.829  Rotation 90
    D83    Rectangle 0.711 X 1.098
    D85    Round 0.127
    D86    Rounded Rectangle 0.600 X 1.100 X 0.050

Gerber Output
=============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Top Copper.gbr

    Layers:
    ------------------
    Top Copper
    Board Outlines

    D-Code Shape  (mm)
    -------------------------------------------------
    D12    Round 0.076
    D20    Round 0.250
    D85    Round 0.127
    D87    Round 0.635
    D88    Round 7.500
    D89    Round 1.500
    D90    Rectangle 0.508 X 1.245  Rotation 90
    D91    Rectangle 2.515 X 3.200
    D92    Rectangle 2.600 X 3.500  Rotation 90
    D93    Round 3.200
    D94    Rectangle 0.864 X 0.965
    D95    Rectangle 2.000 X 5.000
    D96    Rectangle 0.864 X 0.965  Rotation 90
    D97    Rectangle 1.300 X 1.600
    D98    Rectangle 2.000 X 5.000  Rotation 90
    D99    Rectangle 2.700 X 8.000
    D100   Rectangle 1.400 X 3.000  Rotation 90
    D101   Rectangle 0.450 X 1.800  Rotation 90
    D102   Square 1.524
    D103   Round 1.650
    D104   Rectangle 2.100 X 5.600
    D105   Square 2.000
    D106   Round 2.000
    D107   Bullet 3.000 X 1.500  Rotation 270
    D108   Round 3.000
    D109   Bullet 3.000 X 1.500  Rotation 90
    D110   Rectangle 0.762 X 1.250
    D111   Rectangle 1.350 X 1.900  Rotation 90
    D112   Rectangle 1.300 X 1.800  Rotation 90
    D113   Rectangle 1.300 X 1.600  Rotation 90
    D114   Rectangle 0.559 X 1.981  Rotation 90
    D115   Rectangle 0.864 X 1.250
    D116   Rounded Rectangle 0.600 X 1.100 X 0.050
    D117   Round 1.778
    D118   Round 1.420
    D119   Round 1.270
    D120   Round 0.900
    D121   Round 0.381
    D122   Round 2.500
    D123   Round 5.000
    D124   Round 0.810
    D125   Round 1.220

Gerber Output
=============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Top Solder Mask.gbr

    Layers:
    -------------------
    Top Solder Mask
    Board Outlines

    D-Code Shape  (mm)
    -------------------------------------------------
    D85    Round 0.127
    D126   Round 7.652
    D127   Rectangle 0.660 X 1.397  Rotation 90
    D128   Rectangle 2.667 X 3.352
    D129   Round 0.552
    D130   Rectangle 2.752 X 3.652  Rotation 90
    D131   Round 3.352
    D132   Rectangle 1.016 X 1.118
    D133   Rectangle 2.152 X 5.152
    D134   Rectangle 1.016 X 1.118  Rotation 90
    D135   Rectangle 1.452 X 1.752
    D136   Rectangle 2.152 X 5.152  Rotation 90
    D137   Rectangle 2.852 X 8.152
    D138   Rectangle 1.552 X 3.152  Rotation 90
    D139   Rectangle 0.602 X 1.952  Rotation 90
    D140   Square 1.676
    D141   Round 1.802
    D142   Rectangle 2.252 X 5.752
    D143   Square 2.152
    D144   Round 2.152
    D145   Bullet 3.152 X 1.652  Rotation 270
    D146   Round 3.152
    D147   Bullet 3.152 X 1.652  Rotation 90
    D148   Rectangle 0.914 X 1.402
    D149   Rectangle 1.502 X 2.052  Rotation 90
    D150   Rectangle 1.452 X 1.952  Rotation 90
    D151   Rectangle 1.452 X 1.752  Rotation 90
    D152   Rectangle 0.711 X 2.134  Rotation 90
    D153   Rectangle 1.016 X 1.402
    D154   Rounded Rectangle 0.600 X 1.100 X 0.050
    D155   Round 1.930
    D156   Round 3.952
    D157   Round 1.572
    D158   Round 0.962
    D159   Round 1.372

Gerber Output
=============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Bottom Copper Mask.gbr

    Layers:
    ----------------------
    Bottom Copper Mask
    Board Outlines

    D-Code Shape  (mm)
    ----------------------
    D85    Round 0.127
    D126   Round 7.652
    D129   Round 0.552
    D131   Round 3.352
    D140   Square 1.676
    D141   Round 1.802
    D143   Square 2.152
    D144   Round 2.152
    D150   Round 1.930
    D151   Round 3.952
    D152   Round 1.572
    D153   Round 0.962
    D154   Round 1.372

Gerber Output
=============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Bottom Silkscreen.gbr

    Layers:
    ---------------------
    Bottom Silkscreen
    Board Outlines

    D-Code Shape  (mm)
    ---------------------
    D10    Round 0.200
    D11    Round 0.127

Gerber Output
=============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Bottom Copper.gbr

    Layers:
    ------------------
    Bottom Copper
    Board Outlines

    D-Code Shape  (mm)
    ----------------------
    D10    Round 0.200
    D11    Round 0.127
    D12    Round 0.635
    D13    Round 0.500
    D14    Round 7.500
    D15    Round 3.200
    D16    Square 1.524
    D17    Round 1.650
    D18    Square 2.000
    D19    Round 2.000
    D70    Round 1.778
    D71    Round 1.420
    D20    Round 1.270
    D21    Round 0.900
    D22    Round 0.810
    D23    Round 1.220
    D24    Round 2.500
    D25    Round 1.780
    D26    Round 5.000
    D27    Round 0.381

NC Drill Output
===============

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Drill Data - [Through Hole].drl

    Output:
    ---------------------------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    Tool  Size       Count   ID
    ----------------------------------
    T001  0.40000 mm 70    F
    T002  0.60000 mm 6     J
    T003  0.80000 mm 14    S
    T004  0.90000 mm 20    D
    T005  1.06680 mm 3     V
    T006  1.10000 mm 3     E
    T007  1.20000 mm 4     I
    T008  1.30000 mm 10    L
    T009  2.40000 mm 4     AA
    T010  3.50000 mm 4     K
    ----------------------------------
    Total            138
    ----------------------------------

E:\Electronics\Can Bus\Hyd Drive Board 02\Plots\Hyd Drive Board 02 - Drill Data - [Through Hole] (Unplated).drl

    Output:
    -----------------------------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    Tool  Size       Count   ID
    ----------------------------------
    T001  0.63500 mm 1
    T002  3.80000 mm 1     W
    ----------------------------------
    Total            2
    ----------------------------------


Gerber Output
=============

plot.ger

    Layers:
    ------------------
    [Through Hole]
    Board Outlines


Drill Ident Drawing
===================

    Drill Plated Size  Shape ID
    ------------------------------------
    0.900 Y      2.540 Round D
    1.100 Y      2.540 Round E
    0.400 Y      2.540 Round F
    1.200 Y      2.540 Round I
    0.600 Y      2.540 Round J
    3.500 Y      2.540 Round K
    1.300 Y      2.540 Round L
    0.800 Y      2.540 Round S
    1.067 Y      2.540 Round V
    3.800        2.540 Round W
    2.400 Y      2.540 Round AA

    D-Code Shape  (mm)
    ---------------------
    D11    Round 0.127
    D28    Round 2.540

End Of Report.
